Prepare Surfaces Like a Pro
Prepare Surfaces Like a Pro
GET THE JOB DONE
15-20 minutes dry to touch
RAPID MEMBER
E2U Rapid Mender™ is a high-penetration two-part polyurea that when combined with an optional grit size silica sand creates a VERY strong concrete spall, joint and crack filler.
This nearly water-thin formula to fill in imperfections in your concrete surface prior to applying decorative coatings for a smooth flat, imperfect surface.
Can be mixed and applied in a wide range of temperatures but when applied at approx. 72 degrees, time to grind flush w/surface will be approximately 20 minutes.
CURE TIME: 2 HOURS DRY TO THE TOUCH
E2U POLYUREA CRACK REPAIR KIT
Crack Repair is a 2-component, elastomeric sealing polymer system designed to act as a crack filler primarily in concrete.
This material provides exceptional adhesion characteristics and fast cure times. It is highly chemical and abrasion resistant, UV stable, insensitive to water, and remains thermally stable in a range of -20°F (-29 C) to 250°F (125 C).
It may be used under traditional floor coatings or any of our top-coating materials.
Crack Repair is used in heavy traffic warehouse floors, refrigeration floors, chemical spill-prone floors, pothole road repair or under ceramic tile floors. It meets FDA regulations for indirect food contact (CFR 21, Sec. 175-300).